OTA 软件包构建中的“ninja failed related error”故障排除指南

2024-03-08 23:54:10

OTA 软件包构建中的“ninja failed related error”故障排除指南

在构建 OTA 软件包时遇到“ninja failed related error”错误时，可能令人沮丧。本文旨在通过提供详细的故障排除步骤和潜在解决方案，帮助解决此问题。

问题

执行 OTA 软件包构建命令的第三行时，可能会遇到以下错误：

FAILED: out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/kernel_configs.txt out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/kernel_version.txt
/bin/bash -c "(out/host/linux-x86/bin/unpack_bootimg --boot_img out/target/product/generic_arm64/boot.img --out out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/unpacked_bootimage ) && (build/make/tools/extract_kernel.py --tools lz4:out/host/linux-x86/bin/lz4  --input out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/unpacked_bootimage/kernel   --output-configs out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/kernel_configs.txt    --output-release out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/kernel_version.txt )"
boot magic: ANDROID!
kernel_size: 40960
kernel load address: 0x00008000
ramdisk size: 733285
ramdisk load address: 0x02000000
second bootloader size: 0
second bootloader load address: 0x00f00000
kernel tags load address: 0x01e00000
page size: 4096
os version: 7.0.0
os patch level: 2016-08
boot image header version: 0
product name:
command line args: androidboot.hardware=angler androidboot.console=ttyHSL0 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 boot_cpus=0-3 buildvariant=userdebug
additional command line args:
Cannot extract kernel configs in out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/unpacked_bootimage/kernelCannot extract kernel kernel release in out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/unpacked_bootimage/kernel
16:04:30 ninja failed with: exit status 1

#### failed to build some targets (04:24 (mm:ss)) ####

潜在解决方案

1. 检查配置设置

确保已正确执行 build/envsetup.sh 和 lunch tardis-eng 命令，并检查您的配置设置是否正确。

2. 确保存在内核配置和版本文件

确认是否存在文件 out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/kernel_configs.txt 和 out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/kernel_version.txt。如果没有，请尝试重新运行以下命令生成它们：

/bin/bash -c "(out/host/linux-x86/bin/unpack_bootimg --boot_img out/target/product/generic_arm64/boot.img --out out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/unpacked_bootimage ) && (build/make/tools/extract_kernel.py --tools lz4:out/host/linux-x86/bin/lz4  --input out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/unpacked_bootimage/kernel   --output-configs out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/kernel_configs.txt    --output-release out/target/product/generic_arm64/obj/PACKAGING/check_vintf_all_intermediates/kernel_version.txt )"